11/8/2023 0 Comments Silk screen emulsion![]() ![]() Our suggestion: Lighting halogen: 5000W Application: 1-2 internal coats, 1-2 external coats Mesh 120T white 60 sec. To determine the correct exposure time, we suggest you conduct some tests with an exposure calculator. Lamp type, distance from lamp to screen, mesh type and coating thickness can affect exposure time. We advise that you dry the screen horizontally in a ventilated drying cabinet, at 30-40☌ for 40-60 minutes depending on the coating thickness. As a general indication, we suggest you apply 1 or 2 coats of emulsion on the external face of the screen and 1 or 2 coats on the internal face, wet on wet, then a final dry coat on the inside of the screen to push the emulsion to the back of the screen. We recommend you always degrease the mesh. Since it is a polymer emulsion we recommend you work in an area with low to little light, not under a direct light or in sunlight. Next, mix the whole dose with SCREEN-SOL QV, stir well and then let it settle for approximately 2 hours to eliminate air bubbles or overnight would be preferred. Screen Chem Catalyst – (makes emulsion permanent)Īdd a small amount of water to diazo-sensitiser and shake well. High resistance to inks (plastisol, waterbased and solvent).The emulsion includes the required sensitiser and works well for beginners and advanced printers.Ĭheck out this blog post to see which emulsion is best for you ![]() ![]() Sensitize with diazo, add a small amount of water to the bottle with diazo in in order to dissolve the powder. Suitable to work with any kind of light source. It very good resistance to both plastisol and waterbased inks. High definition for screens up to 120T/305. This is also a dual-cure photo emulsion for plastisol ink. Spot Cleaning Solutions and Accessories. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |